美国SKC Biolite微生物采样泵产品概述：

美国SKC Biolite微生物采样泵

技术参数：

zui大流速Maximum flow rate: 30.5 litre/min；
背压流速：Maximum back pressure: 800mbar；
尺寸：Dimensions: W x H x D 162 x 209 x 338mm；
重量：Weight: 6.05kg；
防护等级Enclosure rating - IP20
操作温度Operating temperature: 0°C to +40°C
操作湿度Operating humidity: 0 to 95% Rh
电压Mains supply: 220/230V ~ 50Hz
电流Maximum input current: 0.66A
噪音Operating noise level: 67 - 71dBA @ 1metre

找到一个合适的电源插座，在泵背部插入电源引入IEC电源，规格为：英国3针和2欧元引脚电源引线，选择正确插头。

打开流量调节器，*逆时针方向以确保它是*开放的，然后打开电源开关。

打开泵的开/关，使泵运行五～十分钟稳定之前任何流量校准，关机，停止泵。

打开泵的开关。如果使用流量调节器需要调节流量。打开流量调节器顺时针和逆时针降低流动率增大流量。使泵运行五分钟，流量稳定在采取任何刻度读数。当所需的流量已定，流量调节器可以用锁紧螺母锁紧。

背压力表给出一个，这个指示的SKC BioSampler正确操作r达到吸15in汞音速。

Insert the mains lead into the IEC mains inlet at the rear of the pump and plug the lead into a suitable mains outlet socket. Both UK 3 pin and Euro 2 pin mains leads are supplied with the unit, select the correct lead for your location.

Turn the flow adjuster fully counter-clockwise to ensure that it is fully open. Switch on the mains supply.

Switch on the pump using the on/off switch at the rear of the pump. Allow the pump to run for five to ten minutes to stabilise before commencing any flow calibration. Switch the pump off using the on/off switch at the rear of the pump.

Connect the sample train to the pump inlet hosetail. Switch on the pump using the on/off switch. Adjust the flow rate if required using the flow adjuster. Turn the flow adjuster clockwise to reduce the flow rate and anti-clockwise to increase the flow rate. Allow the pump to run for five minutes for the flow rate to stabilise before taking any calibration readings. When the desired flow rate has been set, the flow adjuster can be locked using the locking nut.

The back pressure gauge gives a reading of the suction generated by the pump due to the restriction to flow of the sample train. This is important for indicating correct operation of the SKC Biosampler - the Biosampler achieves sonic flow at a suction of 15in Hg (refer to the Biosampler instructions for further details).

美国SKC具备优秀的样品泵，如AIRCHEK2000美国SKC，升级版airchek touch,通用泵和XR5000气体采样泵，提供*品质的实验室和工业检测仪器设备。通过专业、细致和全面的服务实现为客户创造更多价值。