KA33热式风速仪产品概述：

加野作为拥有70年风速仪研究历史的测量仪器制造商，其KA33热式风速仪一直作为电力节能、化纤、暖通空调、科研院所等领域的风速测量主力军，为客户提供了专业的测量经验和解决方案。近十年来，加野人始终坚持对KA22/KA33的客户进行售后跟踪并了解技术难题，并通过不断地对新技术研究，十年磨一剑，将于8月隆重推出热式风速仪KA23/KA33,新产品是在继承原有风速计KA22/KA23优势的基础上，又一全面升级产品。
与以往KA22/KA33相比，新产品KA33热式风速仪在外形、功能、精度方面都有新的改进。主要体现在外观简洁化，功能多样化，操作智能化、测量精准化。
和KA22/31相比，新品体积缩小30%，机体采用高档银灰镀膜，仪器左侧为各功能按键，*可以单手操作，解放右手，轻巧灵便，方便快捷;探头可自由伸缩，平时不使用时缩回去可以完好地保护探头。仪器采用35inch彩色大屏幕，且具备三级背光选择功能，更加节省能源，有效延长了电池的使用寿命。

日本加野KA33热式风速仪特点：

与KA22/31相比，体积缩小30%，电池寿命延长25%。
3.5inch彩色大屏幕，风速、风温、压力同时显示。
数字、模拟双视图显示、具备三级亮度背光选择功能。
具备风速判定测试模式，任意设置上下限。
具备风速统计计算功能。

产品参数：

Never bring the probe close to a flammable gas atmosphere.
The heated sensor may cause a fire or explosion.
Never touch the sensor.
The sensor is heated during operation. Touching the heated sensor
may cause burns, and may also damage the sensor itself.
Do not disassemble or heat the batteries, or put them into a fire.
This may cause burns and the batteries may burst.
If abnormal noises, smells or smoke occur, or if liquid enters the instrument, turn off the instrument immediay, and remove the batteries or pull out the plug.
There is possibility of malfunction, electric shock, and/or fire. Please contact your local distributor or our service center for repair.
Always unplug the instrument from the electrical outlet when the instrument is not in use.
Failure to do so may cause an electrical shock, fire or circuit damage.
Do not use the instrument in a water vapor atmosphere.
Condensed steam on the sensor will change the heat dissipation rate,resulting in inaccurate measurements. It may also cause damage to the sensor.
This instrument is designed to be used in an environment with a clean air stream without any dust or foreign materials.
Foreign materials may cause damage to the sensor. Also dust or foreign materials on the sensor will impede accurate measurements.
Do not apply force to the sensor.
If the sensor is deformed, the accuracy of the sensor may beaffected.
When measuring, ensure that the direction mark is facing into the airflow.
Otherwise, the measurement may be inaccurate, as some sensors
(uni-directional probes) have a specific directivity.